Directions for use: For proper spraying, can should be near room temperature (72°F/22°C) Hat to be treated must be clean and dry, and should be shaped before spraying. Not recommended for use on nonporous materials (on sweatbands, trim, etc.) May effect some colors; test first on an inconspicuous area.
Hold can upright with spray button about 6 to 8" (15 m) from the hat surface and spray evenly over the entire are to be treated. Excessive wetting may darken some colors. Seams, thick material, and other extra-absorbent areas may need a heavier spray or second treatment to give best repellent. Allow hat to dry thoroughly before spraying again or wearing. Repeat as necessary when repellent is noticeably diminished, especially after hat is cleaned.